Filter By:
Workstands
$279.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
$220.00
The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.
$469.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube.
• PCS-4-1 uses the 100-5C Adjustable Linkage Clamp.
• Clamp rotates 360º and is adjustable in height up to 67” (170cm)
• Adjusts quickly from 55" to 72"
• Approximate weight 26 lbs (11.8 kg)
NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
$59.95
Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!
$279.95
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.
The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.
The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion.
The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.?
- Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts
- Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts
- Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage
- Durable, textured powder coat finish
- Integrated height-adjustable parts tray
- Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)
- Maximum weight capacity*: 80 lbs. (36 kg)
- Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever
- Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm)
- Folds down to 45"" x 14.5"" (1140 mm x 370 mm)
- Weight: 16 lbs. (7.2 kg)"
$87.95
Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance.
- CLAMP HEAD: hollow spindle drive side crank
- ADD FEATURE: Quick tool-free assembly
- MATERIAL: Aluminum / Engineering grade polymer / Steel
- MAX WEIGHT CAPACITY: 18 kg / 39.7 lb
- COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm)
- SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1”
- SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15”
- 1.8 kg / 3.97 lb
$150.00
Have you ever wondered why all Feedback Sports bike repair stands have exposed frame above the clamp head? Our Pro Truing Stand is designed to sit atop all of our portable stands! The truing stand also includes a free-standing steel base and a bench-mount adapter for when you're not traveling to races and top-secret trailheads. This single-arm, precision wheel and rotor truing stand is awesome at home and excels at races, events, or adventure-riding weekends. And with the all-new Thru-Axle Adapter, it can accommodate the most common wheel sizes for quick-release or thru-axle hub designs. Use the benchtop mount for an awesome tubeless setup and tubular gluing station.
- All-New Thru-Axle Adapter accommodates: 10mm, 12mm, 15mm and 20mm – up to 157mm wide hubs (SuperBoost)
- Single-arm design is lightweight, portable and compatible with most wheel systems
- Precision spring-loaded tip can verify lateral and radial rollout
- Measurement arm includes a disc brake rotor truing slot
- Steel base measures 10.25 x 8.5-inches (26.5 x 21.5cm) and 5.8lbs (2.6kg)
- Bench mount measures 4 x 6-inches (10.1 x 15.2cm)
- Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant and incredibly durable
- Can accommodate up to 29-inch wheel with tire mounted
- 9mm quick-release hubs use quick-release for mounting
- 12mm, 15mm and 20mm thru-axle adapter included
- 3-Year Warranty
$109.95
Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race!
$44.95
Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.
$9.14 - $25.08
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp:
- 1002: fits 100-3X and 100-5X extreme range clamps
- 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12
- 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps
- 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps
- 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps
- 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current)
- 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C)
- 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands)
- 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
$269.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.
$151.12 - $187.82
After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use.
• #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33
• #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939")
• #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud)
• Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes
• Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes
• Long travel cam handle allows quick entry, adjustment and exit
• Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts.
• Durable, replaceable jaw covers
• Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle
• Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts
• Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments
$429.95
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
$25.95
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Team Race Stand. It makes travel easy and convenient, while also protecting your stand.
$50.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Portable Wheel Dishing Tool is a must. It disassembles quickly for storage or travel and allows you to easily check centering on road, mountain and BMX wheels from 24 to 29 inches in diameter and it works with any hub. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
$307.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
$233.12
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers.
- Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96
- Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers
$164.95
A bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand. Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal.
- Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1-inch to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material
- Narrow clamping jaws (2.7-inch/7cm) fit into tight areas or on short seat posts
- 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs
- All-steel structure for maximum stiffness and durability
- Super strong glass-filled nylon-composite fittings and top tube internals enable smooth rotation and secure positioning
- Mounts to any flat surface (mounting bolts not included)
Distance from the center of the clamp to the center of the mount is approximately 11 3/4-inch (30cm). Height from bench to center of the clamp axis is approximately 9 7/8-inch (25cm).
Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.
$180.00
Being a "shade tree mechanic" doesn't mean you should lean your bike against a tree. You paid hard-earned money for your family's bike collection and we've got a budget-conscious, yet feature-loaded bike repair stand that's perfect for the home bike mechanic. The price-point leading 360-degree rotating clamp can position your bike optimally for any work you're planning. Plus, the Recreational Stand leverages a 52-inch (132cm) wide base with rubber-coated end caps for fantastic stability on any surface. And when the service day is done, it folds into a space-saving unit for storage. Add a Tool Tray, Bottle Opener, and a Pro Truing Stand for the complete at-home bike shop.
- Seatpost clamp features Spinner Knob for quick closure and precision clamping pressure
- 360-degree rotating clamp design provides easy access to any part of your bicycle
- Fixed clamp height at 55-inch (139cm)
- Rubber-coated clamp secures and protects expensive components and beautifully painted frames
- Clamp opening up to 1.9-inch (4.8cm) accommodates even the largest diameter frame tubes
- Powder-coated steel construction is corrosion-resistant and incredibly durable
- Stiff 52-inch (132cm) base and rubber-coated end caps create ultimate stability even on uneven surfaces
- Total load capacity of 60lbs (27.2kg) accommodates service on most road, mountain bikes, fitness bikes, and electric bikes
- Portable and compact construction creates a remarkably small folded footprint of 10 x 4 x 55-inches (25.4 x 10.2 x 139.7cm)
- Optional Travel Bag available
- At 13.8lbs (6.3kg), moving in and out of storage is no problem
- No assembly required
- 3-year Warranty
$260.00
At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.
$18.95
Park's Work Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools and small parts close at hand. It has deep sides so your small items stay put and many slots for holding your tools. The Tool Tray fits Park's PRS-2, PRS-3, PRS-6, PRS-11, PRS-12, PCS-1 and PCS-4 repair stands.
$267.95
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately).
• 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate
• Approximately 68 lbs (31k)
• Black painted
$61.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
$24.74
Park Tool's Repair Kit features the most common replacement parts for the 100-3C and 100-5C clamps.
Includes:
• 118s adjusting barrel
• 117s eyebolt
• 121s adjusting barrel pivot
• 136 nut
• 116s cap screws (2)
• 108s-2 pins (2)
• 107s-2 pin (1)
• Washers (3)
• E-clips (3)
$63.95
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2, PRS-3, PRS-6, PRS-13, PCS-1, PCS-1 and PCS-4 repair stands manufactured after June 1996 (stands sold separately).
$419.95
Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport.
- Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg)
- Adjustable BB height of 30" to 45" / 76cm to 114cm
- 360 degree horizontal rotation allows easy access to all sides of the bike
- Customizable bottom bracket supports accommodate a wide variety of BB shells
- Main beam is adjustable fore and aft to customize balance points
- Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder
- Easily transported in the BAG-20 (sold separately)
$395.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability
$19.95
The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease.
- Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3
- Easily removed and installed with hook-and-loop material
$7.73
The 1971 installs onto the clamps found on most Park Tool repair stands to more securely hold D-shaped seatposts by converting one jaw profile to a flat surface. This is useful for bikes with D-shaped seatposts and other non-traditional designs that would cause a less-than-ideal fit in traditional repair stand jaws. The 1971 is designed to fit over a clamp's existing jaw covers and is easy to remove and install by hand, making it a convenient accessory for your repair stand.
Compatible with the following repair stands:
- PCS-9.2 and PCS-9.3
- PCS-10.2 and PCS-10.3
- 100-3D Micro-Adjust Clamp, as found on PRS-2.2, PRS-2.3, PRS-3.2, PRS-3.3, PRS-33.2
- 100-5D Micro-Adjust Clamp, as found on PCS-4
- 100-25D Micro-Adjust Clamp, as found on PRS-25 and PRS-26
$42.00
Feedback Sports repair stands are the ultimate portable and home service partner for the most demanding mechanics. They’re ultralight, compact, and durable design delivers unmatched stability, adjustability and portability. Our Travel Bag collection is an awesome travel and protective companion for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand. Be the most popular mechanic at home with a brilliant storage bag.
- Maximize the portability of your Feedback Sports repair stand
- Protect your stand’s aluminum finish and your other equipment when traveling
- Travel bag is water-resistant, durable and padded
- Enough space for a Sprint Repair Stand and a Flop Stop
- External window for business cards / ID card
- Padded Velcro strap for comfortable carrying and transport
- Full length, dual-zipper design
- Rugged end-loops for vertical storage when not in use
- 1-Year Warranty
Page 1 of 3
Next page