Other

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Mounting hardware fits a variety of Cane Creek shocks.

Travel reduction clips for Cane Creek suspension forks.

Replacement bushings for Cane Creek shocks.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Replacement seals for servicing Cane Creek rear shocks.

Springs for Cane Creek DB Coil shocks come in a variety of lengths and weights. - Upgrade or repair Cane Creek DB coil shocks

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob

Air Spring Volume Reduction Kit - 1 x 5000 cubic mm spacer - 2 x inner air can o-rings

Bearings for Cane Creek AER headsets. - Aluminum Bearing

Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.

40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction

Elastomers are designed for use with eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Extra Soft: 40 Durometer - Soft: 50 Durometer - Medium: 60 Durometer - Firm: 70 Durometer - Extra Firm: 80 Durometer

Replacement inserts for Thudbuster G4 suspension seatposts.

Replacement inserts for Thudbuster G4 suspension seatposts.

Replacement clamp kit for Thudbuster G4.

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

Bolt on axle for HELM/HELM MKII

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 38mm lower headset bearings - Compatible with 26.4mm (1") straight steerer tubes - Durable steel construction

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets

Elastomers are designed for use with eeSilk seatposts, featuring different durometers that provide different levels of comfort. - Extra Soft: 40 Durometer - Soft: 50 Durometer - Medium: 60 Durometer - Firm: 70 Durometer - Extra Firm: 80 Durometer