12- to 24-Inch

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

IRC produces a 125psi high pressure casing and wraps it with a factory-siped slick. Additional surface area is applied to the crown through the innovative use of reinforcement gussets at the edges.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

- RaceGuard protection with a double layer of Nylon fabric under thetread - Endurance compound rubber for the highest durability - E-bike ready—suitable for speeds up to 50kph

Box One™ 120 TPI Folding Tires were engineered with a minimalist approach to hit lofty goals for weight, traction, rolling resistance, and rebound. At its heart is a super-supple 120TPI casing where we forced in as much rubber displacing nylon as possible. Skin walls are employed to reduce drag and further reduce weight. We flanked the high-density casing with a tightly packed hoop of aramid fibers. Finally, we draped this all with BMX race-specific tread that transitions from a center band with a large contact patch to unidirectional tactile knobbies on the sides. This aggressive combination allows for maximum traction out of the gate, immense adhesion in the corners, and low rolling resistance in the straights. A state-of-the-art mixture of compounds is used in various areas of the apex, wall, bead seat, and center – with higher silica content in the tread to again remove more weight. Note: Not a tubeless tire FEATURES: - 120 TPI High-Density Casing - Aramid Folding Bead - High-Traction Directional Grooves for Starting Gate Grip Point - Low Rolling Resistance Center Strip Chevrons - Countless Ramped Hexagonal Directional Knobbies

Pasela is Panaracer's standard all around touring or urban commuting tire. Its comprehensive size range ensures that you can find a Pasela for most any usage. Ride it and trust it. - Steel (Wire) bead

- BMX tire with deep knobs for traction

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

- Cruiser tire with large air volume for shock absorption - Wire bead

Micro-knurled blocky tread suited for a wide variety of terrain from street and park to hard pack trails and more. - Street/park tire, tacky tread with tightly bunched knobs - Wire bead - Size: 20 x 1.95

- Entry-level Freestyle tire with durable casing to prevent pinch flats - Wire bead - Size: 20 x 1.75

- Entry-level BMX/MTB tire with deep knob pattern for traction - Wire bead - 20 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Gray tread, sidewalls with raised center and lateral knobs - 24 x 1-1/4 (ISO 547) - 24 x 1-3/8 (ISO 540)

- Micro cellular self-skinning urethane foam - Multi conditions tread pattern - Type: Semi-pneumatic - Not compatible with all wheel types WARNING! Do not expose to chlorine as it will degrade the foam

Classic knobby BMX tread now available in multiple colors with skin sidewalls. - Wire bead - 30 TPI

- Entry-level BMX-style tire with sturdy casing for longevity - Size: 18 x 1.75

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 18 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Slick center tread with continuous curved lines on each side of the outer tread surface - Perfect for old-school rides such as the Schwinn Stingray or new BMX bikes with a knack for old-school vibes