12- to 24-Inch

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 406 - Bead: Wire - PSI: 65

Park/street tire, with directionally grooved tacky tread. - ISO: 355 - Bead: Wire

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

IRC produces a 125psi high pressure casing and wraps it with a factory-siped slick. Additional surface area is applied to the crown through the innovative use of reinforcement gussets at the edges.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

- RaceGuard protection with a double layer of Nylon fabric under thetread - Endurance compound rubber for the highest durability - E-bike ready—suitable for speeds up to 50kph

Box One™ 120 TPI Folding Tires were engineered with a minimalist approach to hit lofty goals for weight, traction, rolling resistance, and rebound. At its heart is a super-supple 120TPI casing where we forced in as much rubber displacing nylon as possible. Skin walls are employed to reduce drag and further reduce weight. We flanked the high-density casing with a tightly packed hoop of aramid fibers. Finally, we draped this all with BMX race-specific tread that transitions from a center band with a large contact patch to unidirectional tactile knobbies on the sides. This aggressive combination allows for maximum traction out of the gate, immense adhesion in the corners, and low rolling resistance in the straights. A state-of-the-art mixture of compounds is used in various areas of the apex, wall, bead seat, and center – with higher silica content in the tread to again remove more weight. Note: Not a tubeless tire FEATURES: - 120 TPI High-Density Casing - Aramid Folding Bead - High-Traction Directional Grooves for Starting Gate Grip Point - Low Rolling Resistance Center Strip Chevrons - Countless Ramped Hexagonal Directional Knobbies

Pasela is Panaracer's standard all around touring or urban commuting tire. Its comprehensive size range ensures that you can find a Pasela for most any usage. Ride it and trust it. - Steel (Wire) bead

- BMX tire with deep knobs for traction

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

- Cruiser tire with large air volume for shock absorption - Wire bead

Micro-knurled blocky tread suited for a wide variety of terrain from street and park to hard pack trails and more. - Street/park tire, tacky tread with tightly bunched knobs - Wire bead - Size: 20 x 1.95

- Entry-level Freestyle tire with durable casing to prevent pinch flats - Wire bead - Size: 20 x 1.75

- Entry-level BMX/MTB tire with deep knob pattern for traction - Wire bead - 20 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Gray tread, sidewalls with raised center and lateral knobs - 24 x 1-1/4 (ISO 547) - 24 x 1-3/8 (ISO 540)

- Micro cellular self-skinning urethane foam - Multi conditions tread pattern - Type: Semi-pneumatic - Not compatible with all wheel types WARNING! Do not expose to chlorine as it will degrade the foam

Classic knobby BMX tread now available in multiple colors with skin sidewalls. - Wire bead - 30 TPI

- Entry-level BMX-style tire with sturdy casing for longevity - Size: 18 x 1.75

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 18 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Slick center tread with continuous curved lines on each side of the outer tread surface - Perfect for old-school rides such as the Schwinn Stingray or new BMX bikes with a knack for old-school vibes

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 507 - Bead: Wire - PSI: 65

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

Light up the track or street with the Torch! - Grooved slick center tread - Lightweight construction - Textured cornering knobs Originally designed as a race tire for modern BMX tracks, the Torch brings the heat to your competition.

The Donnastreet tire features a smooth center for low rolling resistance and an extra grippy, super-squeaky compound. - Tear-resistant silkworm casing

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Based on the popular Path tire from the early 2000's, The Path Pro has been fully redesigned to meet today's riding styles. This includes a proprietary rubber compound that is both extra-grippy and long-lasting, bigger sizing options, and an all new tread pattern inspired by the original with a smooth center tread and knurled side blocks. - Directional tread pattern with smooth center tread - Proprietary rubber compound - Improved grip & wear resistance - Micro-knurled side blocks

Tom Dugan's signature Dugan tire features a fast center tread for park, street and dirt. - Dual ply casing

Based on the popular Path tire from the early 2000's, The Path Pro has been fully redesigned to meet today's riding styles. This includes a proprietary rubber compound that is both extra-grippy and long-lasting, bigger sizing options, and an all new tread pattern inspired by the original with a smooth center tread and knurled side blocks. - Directional tread pattern with smooth center tread - Proprietary rubber compound - Improved grip & wear resistance - Micro-knurled side blocks

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

- Kenda model K50 - A good, basic repair tire

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

Tough enough for the meanest streets - Durable enough for urban assault, park riding, commuting, cargo bikes, etc. - Grooved slick tread design - Wrap-around tread pattern As the original urban assault tire, we designed the Hookworm to take the abuses of the most aggressive street riders. Bead-to-bead tread provides durability and traction whether you're dropping staircases, grinding rails, or riding in your local skate park.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Super Circuit tire has been designed to meet the demands of pro-level BMX racing and park/transition riding. Some of Odyssey’s most iconic tires have inspired the Super Circuit's all-new tread design, with a focus placed on its shallow, grippy tread block depth and K-Lyte Plus casing layup to save weight. The Super Circuit tire features a fast and smooth center tread, knurling on the side blocks, and it is offered in a competition-ready foldable bead option only. - Designed for pro-level racing and park/transition - Lightweight K-Lyte with kevlar bead - Shallow, grippy tread block depth for to save more weight - Directional tread pattern with smooth center tread - Micro-knurled side blocks

A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire's fast rolling center tread allows it to be used on all terrains. - Single-Ply sidewall

Salt Tracer Tire is made with a quality rubber compound and features a modern directional-tread design. - Knurled for improved traction

Proven on the mountain bike World Cup circuit and now taking the same grip and versatility to gravel and cross. This Booster Pro features the same aggressive tread pattern and performance rubber compound as it's larger MTB brother letting you push the limits off the trails. Optimized for tubeless use, resulting in one of the fastest and lightest aggressive condition gravel/cross tires on the market. - New tread design: modern and aggressive look, optimized for fast rolling and excellent cornering traction. - Always prepared: The Booster is a great choice for all seasons. It's fast on hardpack, but also holds its own when it gets wet and slippery. - Tubeless ready

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

The Kenda Alfabite is a great all-around budget mountain/BMX tire, available in a steel bead. - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tires

Kenda Kontact K841 BMX tire features a wrap around tread design with a knurled surface for better traction and control.

- An uncompromising tire for BMX race wins - Tubeless Ready technology reduces rolling resistance for optimal performance - The MICHELIN Pilot SX has been designed for extra grip while cornering, particularly on hard-packed or dusty terrain

The Nimbus 2 tire features an updated tread and compound that rolls even faster and has more grip than ever before. It comes in many widths to accommodate different bikes, riding styles, and comfort levels, so it's the perfect choice for riding on the road or bike path. - Casing: 30 TPI - Bead: Wire - Compound: 60a - Flat Protection: Flak Jacket - 24 x 1.5", psi 35-65