Other

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

• Aluminum clamp • Built-in rear rack mount

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

• Aluminum clamp with a chromoly bolt

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

- Use: S.I.S. - Length: 30mm

• Aluminum • CNC-finished

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

- Replacement cable anchor bolt for brakes - Includes nut and washer

Sunlite braze-on front derailleur adapter

- Use: Brake - Length: 30mm - Diameter: 5mm

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Universal design double rail saddle clamp

- Alloy construction - Great for Cruiser or BMX bar conversions

- Replacement front cable hanger - Aluminum construction

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Sunlite replacement cartridge bearings - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- DT Swiss cartridge bearings - Sold in pairs

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Cartridge Bearing - 1-3/8-inch Outer Diameter

- Crown Race MX - Size: MX TH 26.4mm

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm

- Rubber - Color: Black

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

- Stainless steel button head bolts - Sold in bags of 10

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- 8x1mm Allen head

- For MTB levers - 7mm x 1mm - Aluminum construction

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Standard replacement cantilever/v-brake bosses

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

- Crown Race - Size: 27.0mm

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

- Standard steel replacement

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

46 x 55 x 51 x 152mm

- Crown Race #8 - Size: 26.4mm - Color: Silver - Material: Alloy

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 37.5mm - Length: 124.5mm - Overall: 145.5mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Chrome allen seat binder bolt

Replacement bearing for the lower half of YST8003 #7 headset.

Designed for maximum comfort, ergonomics, & durability - Bag of 10

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

- Type: Lock washer - Size: 1" Keyed